Skip to main content
Search

# Canopy Height Mapping

2 related articles

Subscribe to updates
  1. arXiv

    Free Sentinel-2 Imagery Yields 0.5 m Canopy Heights: Anchor Reaches 2.83 m Mean Error on 2,530 Held-Out Tiles

    Canopy height maps sampled at 0.5 m can now be produced from free 10 m Sentinel-2 imagery, where sub-meter products previously depended on airborne LiDAR refreshed on multi-year national cycles. Two outputs share the same conditioning: the deterministic regressor Anchor reaches 2.83 m mean absolute error on 2,530 held-out tiles, slightly below Meta CHMv2's 2.90 m from commercial Maxar imagery, while the generative AR-flow, trained on the Anchor's residual, cuts sliced Wasserstein distance from 1.13 to 0.208 at a higher 3.68 m mean absolute error. The authors stress that 0.5 m refers to output sampling only; individual-tree detection stays weak, and generated sub-pixel detail is plausible structure rather than measured trees.

  2. arXiv

    Atlantic Forest gets wall-to-wall canopy height and carbon maps, with regional model error under half the global product's

    The Brazilian Atlantic Forest now has 2024 wall-to-wall maps of canopy height at 10 m and aboveground carbon density at 30 m, with height predicted by a deep learning network fusing optical, radar and elevation data and trained and tested on airborne LiDAR from São Paulo state. On held-out test patches the 10 m height root mean square error is 3.05 m and the 30 m error is 2.58 m; over the same pixels the Meta and World Resources Institute global product has more than twice this error and underestimates canopy height by about a third.

You’re all caught up