RoboParty opens RP1 humanoid all the way down: CAD, firmware and locomotion training code in one stack
Synopsis
RoboParty released RP1, a fully open-source humanoid platform that puts mechanical and electrical design, joint modules, firmware, robot models, a deployment framework and locomotion-learning projects into one connected development stack, so a developer can take a single subsystem or reproduce the whole machine. The public material includes mechanical CAD, schematics, PCB layouts, Gerber files, a bill of materials and assembly documentation, plus a Linux BSP, URDF and MJCF models and deployment modules. The platform supports 24, 28, 30 and 42 degree-of-freedom configurations, and its real-time control layer performs action decoding and serial-link solving at 500 Hz with an emergency stop and a high-frequency feedback loop.
Interpretation
A humanoid's mechanical structure, electronics, joint modules, firmware, robot descriptions, deployment framework and locomotion-learning projects now sit in one public development stack, so a developer can take a single subsystem or reproduce the whole machine. RP1 publishes inspectable hardware, extendable software and explorable intelligence side by side rather than exposing only one of those layers. The public material includes mechanical CAD, schematics, PCB layouts, Gerber files, a bill of materials and assembly documentation, plus a Linux BSP, communication and device interfaces, URDF and MJCF models and deployment modules.
The control chain runs from input and perception through motion retargeting and motion policies into real-time control, then drives ROMOMO joint modules and the RP Hand dexterous hand for whole-body execution. The real-time control layer performs action decoding and serial-link solving at 500 Hz, with an emergency stop and a high-frequency feedback loop that turn learned policies into joint commands. The platform supports 24, 28, 30 and 42 degree-of-freedom robot configurations, and its training workspace is built on Isaac Lab, covering AMP, BeyondMimic and Parkour workflows with RSL-RL training and motion retargeting.
Perspective
The public scope is limited to what RoboParty's sub-repositories contain: mechanical and electronic source files, joint modules and firmware, robot descriptions, the deployment framework and locomotion-learning projects; release contents, supported configurations and setup instructions are maintained in each sub-repository.
IBFM, PredActor and INTACT-JEPA are marked as RP1 support coming soon and are not yet available with the platform; the source gives no measured performance for these projects.
